New Pulsed Amplifier!

W-Band 1Watt (30 dBm) Variable Pulse Amplifier

QuinStar Technology, Inc., is pleased to introduce a new 1W (30dBm) W-Band pulsed power amplifier (QPP–94043018–G0) with variable pulse rate and duty factor. State-of-the-art power combining and fast pulse modulator techniques are utilized. This amplifier features CW, long pulse, short pulse, and burst modes of operation delivering 1 watt (30 dBm) power with ± 0.75 dB flatness over the 92 to 96 GHz band. The amplifier provides 18 dB gain with ± 2 dB flatness over the band. The pulse width of the amplifier can be varied from 100 ns to CW with RF rise/fall time of 10/16 ns.

Specifications:
Frequency Range: 92 to 96 GHz
Gain: 18 dB (Typ)
Gain Flatness: ± 2.0 dB
Psat: 30.0 dBm (Typ)
Output Power Flatness: ± 0.75 dB
VSWR: 2:1 (Typ)
Rise/Fall Time: 10/16 ns
I/O RF Connectors: WR-10 Waveguide/ UG-387 U-M Flange
TTL Pulse Control: TTL High: ON; TTL Low: OFF
DC Bias: +7.5V/3.5 A @ P1dB in CW mode
DC Bias Connectors: Feedthru Pins

Test Results:

Figure 1: Fast Rise and Fall Time

Figure 2: Measured Output Power

Figure 3: Measured Small Signal Gain

Please contact our Sales Department for more information!